Life secrets

How to clean your phone case? Silicone ones.

The first article we wrote about phone cases was how to clean matte phone case. 

Here we will talk about how to clean your phone case if it is silicone. 

How to clean silicone case? 

One of the best solutions to reliably protect your mobile phone from negative external influences are silicone cases. The effectiveness of using such accessories is obvious, but there is also a drawback – the porous structure of the material, because of which they get dirty and gradually lose their presentable appearance. This problem is not easy, but at the same time it is quite easy to solve: it is enough to know how to properly clean silicone covers, which will be discussed later.

What not to clean silicon case with? 

Before you start considering methods for cleaning silicone pads, you should pay attention to the tools that are not recommended for this task. These are:

  • brushes with excessively stiff bristles;
  • sandpaper – even the most fine-grained;
  • needles, knives, and other sharp objects.

The use of the above tools often leads to mechanical damage-scratches and cracks. Growing, the latter can cause the cover to break, after which the accessory cannot be restored. In addition, over time, dirt accumulates in them – and in much larger quantities than before. Another tool that should not be used for cleaning silicone cases is chlorine. Being extremely aggressive, it destroys the structure of the material, resulting in the appearance of yellowness and turbid areas.

Remember that it is not possible to get rid of such defects, and therefore the product with them can only be thrown away.

How to clean phone case?

The most popular method that allows you to put the phone’s protective pad in order involves the use of soft cleaning products-soap, shampoo or dishwashing detergent. To achieve the desired result with it, you need to perform the following steps step by step:

  1. Dilute a small amount of the selected product in a container filled with warm water until foam appears;
  2. Dip the cover in the prepared bath for about 3/4 hour;
  3. Gently rub the problem areas with a sponge or toothbrush;
  4. Wash off the remaining foam with water;
  5. Wipe the product dry with a soft cloth.

The last step is necessary to ensure that there are no traces of drops and stains on the surface of the silicon phone case. It should become a clean phone case. The described method can be used to wash most of the simple dirt-as an option, greasy finger marks and dust adhering to them. Practice shows that it is optimal for the regular cleaning of the silicone case, which is recommended to be carried out weekly. It is also one of the best ways to sanitize cell phone, which can contain a lot of bacteria. 

Cleaning of complex contaminants out of silicone cell phone cover

In a situation, where the use of gentle cleaning agents does not allow you to achieve the desired result, it is reasonable to use stronger means. First of all, these include:

Baking soda

Among all the substances that can cope with deep pollution, this tool is the most delicate. After mixing the soda with warm water, you need to lubricate the resulting” mush ” problem area of the lining. You should not rub the cleaning agent into the stain – just wait until the product is completely dry. The final stage is washing the cover under a stream of warm water until all traces of soda are removed from its surface. 

 

Alcohol or vodka

With these tools, you can get rid of a lot of dirt, but you need to use them with caution. This rule is relevant for cases decorated with a pattern. To clean the silicone cell phone cover, it is necessary to moisten a cotton pad in alcohol or vodka, and then evenly wipe all contaminated surfaces with it. After that, it remains to rinse the protective pad well and wipe it dry. 

 

Nail Polish remover

Like alcohol, this way can damage the pattern decorating the case, and therefore owners of such accessories should use it as carefully as possible. In order to reduce the likelihood of the above-mentioned trouble, experts recommend using liquids that do not contain acetone. You can get rid of dirt using this tool using the algorithm described in the previous paragraph.

Provided that the cover material meets all modern standards, the product owner should not worry about its safety. As a rule, low-grade accessories suffer from strong chemical compounds, the manufacturers of which do not pay due attention to their quality. In order not to risk it, it is enough to apply a small amount of cleaning agent to an inconspicuous area of the lining surface. If the material is not destroyed, the selected components can be used safely.

How to clean rubber phone case, which turned dark?

The most common reason for darkening the surface of a rubber cell phone cases is its close interaction with other materials, such as the fabric of trousers. As for the solution to this problem, first of all, it is considered the use of citric acid or gasoline.

In order to return the lost shade to the overlay, you need to follow the following sequence of actions:

  • wear rubber gloves to help protect your hands;
  • gently and without pressure, wipe the darkened areas of the accessory using cotton wool or a kitchen sponge;
  • wash off any remaining cleaning agents from the surface of the case by placing it under a stream of warm water;
  • wipe the phone cover with a soft cloth.

It is noteworthy that using citric acid or gasoline can remove both darkening and many other difficult contaminants. Using these tools allows you to put in order even the silicone case, which was painted with markers or markers.

A similar result can be achieved in situations where the accessory is “decorated” with spots from green paint and other synthetic dyes.

How to clean a clear phone case that turned yellow?

Despite the many advantages that polymer materials have, they are characterized by such a drawback plastic yellowing. It is characterized by the appearance of a yellowish hue, which is a consequence of the action of sunlight and other less significant factors. This feature is also relevant for silicone products, gradually appearing in the process of their operation. If you select the most effective tools that can overcome such yellowing, then their list will look like this:

  • Ammonia, baking soda, and water mixed in equal proportions. The resulting product should be applied to the problem area of the cover, wait 20-25 minutes and rinse with a large amount of warm water. Finally, wipe the surface of the lining dry using a soft rag;
  • Liquid bleach without chlorine. To remove the yellowness from the cover, it is enough to dip it in a container with a weak solution of this chemical, leaving it there for 20 minutes;
  • Toothpaste. To restore the original color of the silicone product, the product in question should be applied for 1/4 hour, evenly distributing it over the surface of the accessory. After the specified time, the paste should be washed off.

If the yellowed cover was not bleached on the first attempt, then any of the described procedures must be repeated.

Completing the material presented to the reader’s attention, there are many solutions to this problem, and each of them allows you to delay the purchase of a new accessory.

More information you can find on this video:

Leave a Reply

Your email address will not be published. Required fields are marked *

Adblock
detector